Our post driver range covers the requirements of any post driver user, from small farmer to large contractor. Get in touch today and we will be happy to advise about the most suitable machine for your exact requirements.
Our post drivers are produced through a water jet cutting process. This ensures an accurate, stress-free cut without distortion and heat-affected zones.
Water Jet Cutting is a versatile process which uses a jet of water, or a mixture of water and an abrasive substance, at high velocity and pressure to accurately cut or slice metals or other materials. We use this method in the production of our range of fence post drivers. As well as this, we provide a sub-contracted profile cutting service.
This is an environmentally friendly method, producing no hazardous waste and significantly reducing waste disposal costs. It results in a safer work environment, eliminating airborne dust particles and contaminants which arise from cutting materials in more traditional ways.
We are fortunate to have a highly skilled, stable and dedicated staff. Our factory is equipped to the highest standards. Strict quality control procedures are in place to ensure that every post driver we produce will exceed your expectations.
The quality of our post drivers is very important to us and we are totally committed to continuing innovation – we are constantly improving and adding new features to our machines, often as a direct result of feedback and suggestions from existing users.
Vector Powerdrive fence post drivers have been widely acclaimed in both Ireland and abroad. They have been exported to many countries, including Sweden, Germany, the Netherlands, the Czech Republic, Russia, Switzerland, Poland, France, Spain, Greece, the UK, the USA, Canada, Australia, New Zealand and several African countries.
Ideal farmers post driver with 380kg hammer suitable to drive straining posts. This is the most economical post driver we have in our range.
This is the most economical post driver we have in our range.
MODEL 1+
A very cost effective machine and an ideal farmer’s fence post driver, this robust machine is the result of 15 years of extensive testing.
Sturdy, compact, capable and very cost effective to own, this is the ideal machine for the farmer who prefers to do his own fencing.
The 380kg hammer is well capable of driving heavy straining posts.
Hydraulically operated, the post driver attaches to the three point linkage and fits all models of tractor.
MODEL 2
The ideal machine for farm fencing, especially on larger farms, this post driver has all the features of Model 1+ with the added feature of a telescopic mast. There is a great deal of mast movement in 4 directions, which means the post can be pulled or pushed in any of four directions, allowing very precise control of the post being driven. The Independent Post Cap allows for much greater hammer impact, even under extreme conditions, without any tendency for the cap to lift off the post. This precise control combined with the 400KG hammer means this is a truly versatile machine capable of driving posts up to 3.3m in height and 375mm in diameter. This is the most popular post driver used by hire companies as it is easily mounted on a transport trolley thus making delivery no problem.
MODEL 2+
Ideal machine for large scale farmers and part time contractors postdriver. The postdriver has no limitations when it comes to side tilt with 30° of left to right movement. The mast pivots on a heavy duty king pin at the base of the machine which allows the operator to hydraulically pull posts left and right.
It is a particularly compact post driver with all the features of Model 2:
MODEL 3
This de-luxe post driver is cleverly designed to make contract fencing easier and more efficient. Features virtually indestructible construction, hydraulic controls, side shift and tilt making it extremely flexible. It’s robustness, ease of use and maintenance plus a low cost of ownership make it an indispensable workhorse for fencing contractors.
Almost indestructible – the earliest models of this machine were built almost 20 years ago and are still in daily use!
The machine uses the same hydraulically controlled titling mechanism as our Model 2 Post Driver, meaning it has no limitations when it comes to side tilt. In addition hydraulic rams allow stakes to be moved in any direction with complete precision, allowing the mast to remain vertical on any gradient. These features combined with the 380kg hammer, means that this machine can drive straining posts of up to 12′ in height and 12″ in diameter.
The Model 3 post driver is an easily maintained machine which attaches to the three point linkage and fits all models of tractor. A hitch is provided on the post driver so that it can be transported by a tractor while also towing a trailer. It’s extensive range of features make this is an ideal machine and a true workhorse for fencing contractors.
MODEL 4 contractor
This machine is essential for the dedicated contractor and offers unbelievable control and precision at great speed when driving fencing posts. The 90mm diameter Rockspike is an ideal for making a pilot hole into hard compacted ground, roadways etc. The 800mm side shift ensures the machine can slide into a compact position for road transport.
•
400kg hammer
• 800mm side shift
• heavy duty top link with anti creep valve
• hydraulic post rotator
• large flotation skid shoes
• self lubricating wear
• independent hydraulic jack legs
• high degree mast tilt
• ball hitch for trailer
• external valve for excellent visibility and control
• heavy duty Rockspike
• telescopic mast and beam
• drive posts up to 3.5 metres in height
• optional excavator arm for digging
• CE certified
The Model 4 contractor is one of the most compact machines on the market.
Model 4 Agri 120°
• 600mm side shift
• 35° mast pivot
• ball hitch for towing trailer
• compatible with 80hp tractor
• external valve control ensures excellent visibility and control
• standard 250kg hammer
• optional 300kg hammer
• ideal for driving posts in corners and hard to reach places
• fencing posts can be driven directly behind or one side of tractor
• safety cage
• CE certified
MODEL 4 CONTRACTOR 120° SWING
Contractors postdriver, very robust construction which offers the unbelievable ability to reach into difficult corners and hard to reach places. Posts can be driven with absolute precision and great speed. The Model 4 Contractor 120° swing has a two stage side shift which allows the machine to remain compact even when you are driving posts directly behind machine. It also has the Rockspike feature thus allowing posts to be driven in rocky and hardened ground.
Model 5
MODEL 6
This post driver can be mounted on any make of mini-excavator weighing from 1.5 tonnes up. It can also be mounted on a front loader. It is very easy to use in awkward situations and is a robust machine which will give years of service.
MODEL 7
Suitable for farmers and small scale contractors. This is a very versatile machine, allowing posts to be driven up on banks, across drains, over hedges, etc. Attachment brackets can be changes in minutes to fit excavator or loader hitches. The machine has a heavier hammer and longer beam than the Model 6. Thus allows more hammer travel for greater hitting force.
Model 9 excavator postdriver
• 600mm side shift
• one man fencing machine
• 400kg hammer
• independent post cap system
• postdriver is removable from excavator via heavy duty bolts
• hydraulic post rotator
• optional cap adaptors for square posts
• self-lubricating wear pads on side shift
• operator can track machine from same controls as postdriver
• optional rockspike
• fully functional excavator for digging holes etc.
• safety cage
• CE certified
Model 8 – 220° swing
The model 8 220° machine offers outstanding output and versatility for all types of contract fencing. This is a self propelled one man fencing machine. It can rotate 220° from left to right. The machine uses 18 ton of hydraulic force to rotate and slew the postdriver. This design offers the most powerful and trouble free slewing/rotating system on the market.
It has a hydraulic sliding mast and beam which allows the hammer to reach greater heights, and drop lower to the ground.
• patent pending
• 400kg hammer
• telescopic mast
• 600mm side shift
• 18 ton hydraulic slew/rotation
• mast pivot 30° left to right
• Rockspike
• double hydraulic pump
• safety cage
• external machine tracking controls
• CE certified
info@vectorpowerdrive.com
All Rights Reserved | Vector Powerdrive